Cold Ironing

Power Converter Systems
50 Hz, 60 Hz, 400 Hz, Custom, Single and Three-Phase

 
     
     
     
 

Cold Ironing Home
 
PRODUCT OFFERINGS  >  
United States Cold Ironing  
California Cold Ironing  
Cold Ironing Requirements  
Ship Port Cold Ironing  
What is a Cold Ironing Electric Power Converter?  
Implementation of Cold Ironing in Ports  
TEMCo Cold Ironing Electric Power Converters  
Benefits of Cold Ironing  
Implementation of Cold Ironing on Commercial Vessels  
 
PRODUCT OFFERINGS  >  
Shore Port to Ship Power Home  
Ship Port Power Req.  
Navy Cold Ironing Req.  
Marine Port Electric Power Distribution  
Alternative Maritime Power  
Clean Air/Clean Environment  
What is Shore-Line-Power?  
Commercial Vessels using Cold-Ironing  
Feasibility Of Using Cold-Ironing  
Ports Using Cold-Ironing  
 
PRODUCT OFFERINGS  >  
Shore Power Converters >
Phase Converters  
Static Phase Converters  
Power Transformers  
Step Down Transformers  
Isolation Transformers  
Buck Boost Transformers  
Electric Motors  
MG Sets  
Engine Generators  
Capacitor for Motor  
Start Cap  
Run Capacitor  
Starting Capacitor  
Air Conditioner Capacitor  
Motor Capacitor  
Replacement Capacitor  
Test Capacitor  
   
ABOUT US  >  
Career Opportunities  
Contact Us  
GetPower.us Home  


 

 

 




 

Cold Ironing Electric Power Converters


 

Rotary Frequency SelectionHow Cold Ironing Electric Power Converters can help clean up pollution


Cold Ironing is receiving a great deal of interested in ports around the world. With the increasing pressure to clean up the environment and save energy cost, agencies has been aggressively seeking alterative methods for vessels to turn off their engine and plug into the city gird while at port.  Cold Ironing or sometime known as alternative marine power (AMP) is basically the concept of plugging marine vessels into shore based power while they are docking. Marine vessels need power to run lights, heating, air conditioning and hot water for the ship's crew, as well as refrigerated containers.

Commerical and Cruise Ships are Using Cold Ironing Electric Power Converters.

The problems ports and  marine vessels are facing is the different voltages and frequencies found on ships while on shore.  It is estimated that cold-ironing could eliminate over 454 kg of nitrogen oxides emissions, 32 kg of sulfur oxides and 7 kg of particulate matter in a single 24 hour port call for a typical container ship.

A Cold Ironing Electrical Power Converter can offer a economical solution for the different voltages and frequencies that can incur while vessels are at port. A Cold Ironing Electrical Power Converter  converts frequency, voltage and phase. These power converter can convert 50Hz, 60Hz, or 400Hz to run the vessels equipment while docking. A Cold Ironing Electrical Power Converter can also convert voltages, the most common being 208, 240, 400 and 460.
 

A Cold Ironing Electrical Power Converter offers a economical solution for the different voltages and frequencies that incur while vessels are at port.

A Quality Cold Ironing Electrical Power Converter

A  quality Cold Ironing Electrical Power Converter should not only provide the ability to change  frequencies, voltage and phases but provide line isolation, harmonic cancellation and other power factor correction. TEMCo, a top manufacturer ofCold Ironing Electrical Power Converters has been in business for over 25 years.  They manufacture all their products using only quality materials backed by a highly trained technical and engineering staff.  TEMCo with its helpful, knowledgeable staff can answer any questions you may have regarding Cold Ironing Electrical Power Converter. TEMCo stands behind its products with the best warranty in the industry and provides service before, during and after the sale.

 

Cold Ironing Electrical Power Converter takes care of the voltage and frequencies when a ship is plug-in while docking.

TEMCo - A Brand You Can Trust For Quality Industrial Power Solutions
TEMCo Industrial Power Solutions and Cold Ironing Electrical Power Converters are chosen for the most demanding applications by some of the best companies in the world. Some of TEMCo's customers include NASA, General Motors, American Family Radio, Kaiser Permanente, Nordstrom, BAE Systems, UC Berkeley, Navy Public Works Center, US Army Executive Service, FORD, MIT, Stanford Linear Accelerator (SLAC), Lawrence Livermore National Labs (LLNL), and many thousands more. From development to distribution, TEMCo offers the best pricing with fast shipping, always at the most affordable rates

 
 

TEMCo has had extensive experience manufacturing electrical power products since 1968.


 Contact Us
     
Phone    
Inside USA:   (800) 613-2290
USA & International:   (510) 490-2187
Fax:   (510) 490-1507
     
Email:   info@getpower.us
Main web address:   www.getpower.us
     
     
 
Employment Resource Centerr
TEMCo Jobs in Fremont
 
Copyright 1998-2007
TEMCo - Tower Electric Motor Ca