Cold Ironing

Power Converter Systems
50 Hz, 60 Hz, 400 Hz, Custom, Single and Three-Phase

 
     
     
     
 

Cold Ironing Home
 
PRODUCT OFFERINGS  >  
United States Cold Ironing  
California Cold Ironing  
Cold Ironing Requirements  
Ship Port Cold Ironing  
What is a Cold Ironing Electric Power Converter?  
Implementation of Cold Ironing in Ports  
TEMCo Cold Ironing Electric Power Converters  
Benefits of Cold Ironing  
Implementation of Cold Ironing on Commercial Vessels  
 
PRODUCT OFFERINGS  >  
Shore Port to Ship Power Home  
Ship Port Power Req.  
Navy Cold Ironing Req.  
Marine Port Electric Power Distribution  
Alternative Maritime Power  
Clean Air/Clean Environment  
What is Shore-Line-Power?  
Commercial Vessels using Cold-Ironing  
Feasibility Of Using Cold-Ironing  
Ports Using Cold-Ironing  
 
PRODUCT OFFERINGS  >  
Shore Power Converters >
Phase Converters  
Static Phase Converters  
Power Transformers  
Step Down Transformers  
Isolation Transformers  
Buck Boost Transformers  
Electric Motors  
MG Sets  
Engine Generators  
Capacitor for Motor  
Start Cap  
Run Capacitor  
Starting Capacitor  
Air Conditioner Capacitor  
Motor Capacitor  
Replacement Capacitor  
Test Capacitor  
   
ABOUT US  >  
Career Opportunities  
Contact Us  
GetPower.us Home  


 

 

 




 

What is a Cold Ironing Electric Power Converter


 

Rotary Frequency Selection
What Does A Cold Ironing Electric Power Converter Do?

With the increasing pressure to clean up the environment and save energy cost, agencies has been aggressively seeking alterative methods for vessels to turn off their engine and plug into the city gird while at port.  A Cold Ironing Electric Power Converter are used on ship ports or vessels to handle the different frequencies and voltages when ships are cold ironing at port. Cold Ironing Electric Power Converter is a economical solution to handle the different voltages and frequencies that ships and ports have.  A classic example of this is most ocean-going vessels have 440-480 V. Large container ships and passenger ships are configured for 6.6 kV. The larger and newer cruise ships are configured for 11kV. A Cold Ironing Electric Power Converter can take care of all of these different voltages and frequency.

 A Cold Ironing Electric Power Converter being installed

Cold Ironing Electric Power Converter are used for converting power frequency, voltage and phase. With frequency it usually 50 Hz or 60 Hz power line frequency over to 50Hz, 60Hz, or 400 Hz to allow marine vessels power to run lights, heating, air conditioning and hot water for the ship's crew and guest, as well as refrigeration equipment.  The Cold Ironing Electric Power Converter should also offer line isolation, harmonic cancellation, phase conversion, voltage conversion, power factor correction and smooth controlled power output.

A Cold Ironing Electric Power Converter can be made to be either portable  or stationary. In the implementation of cold ironing many ports have a portable unit which can be move from ship to ship to allow the ship to plugged into their power grid. Many new ships and older ship are getting retrofitted to have the converter build right into the ship.  As Cold Ironing becomes global, cold ironing electrical converter will be a economical solutions for the different frequencies and voltages of each port. A  cold ironing electrical converter not only provides an answer to the different frequencies and voltages but it also stabilizes and offer power factor correction.
 

A TEMCo Cold Ironing Electric Power Converter

A Quality Cold Ironing Electrical Power Converter

 TEMCo, a top manufacturer of Cold Ironing Electrical Power Converters has been in business for over 25 years.  They manufacture all their products using only quality materials backed by a highly trained technical and engineering staff.  TEMCo with its helpful, knowledgeable staff can answer any questions you may have regarding Cold Ironing Electrical Power Converter. TEMCo stands behind its products with the best warranty in the industry and provides service before, during and after the sale.

 

Cold Ironing Electrical Power Converter takes care of the voltage and frequencies when a ship is plug-in while docking.

TEMCo - A Brand You Can Trust For Quality Industrial Power Solutions
TEMCo Industrial Power Solutions and Cold Ironing Electrical Power Converters are chosen for the most demanding applications by some of the best companies in the world. Some of TEMCo's customers include NASA, General Motors, American Family Radio, Kaiser Permanente, Nordstrom, BAE Systems, UC Berkeley, Navy Public Works Center, US Army Executive Service, FORD, MIT, Stanford Linear Accelerator (SLAC), Lawrence Livermore National Labs (LLNL), and many thousands more. From development to distribution, TEMCo offers the best pricing with fast shipping, always at the most affordable rates

 
 

TEMCo has had extensive experience manufacturing electrical power products since 1968.


 Contact Us
     
Phone    
Inside USA:   (800) 613-2290
USA & International:   (510) 490-2187
Fax:   (510) 490-1507
     
Email:   info@getpower.us
Main web address:   www.getpower.us
     
     
 
Employment Resource Centerr
TEMCo Jobs in Fremont
 
Copyright 1998-2007
TEMCo - Tower Electric Motor Ca